Standard - Siemens SIMATIC ET 200S Manual

4 IQ-SENSE
13.2.1

Standard

Feedback interface (PII)
Table 13-2 Standard feedback interface
Address
Byte 0
13.2.2 Enhanced
Feedback interface (PII)
Table 13-3 Enhanced feedback interface
Address
Byte 0 Byte 0 Byte 0
13-10
Bit 7: 0 (not assigned)
Bit 6: 0 (not assigned)
Bit 5: 0 (not assigned)
Bit 4: 0 (not assigned)
Bit 3: sensor switching status on channel 3
1: object detected
0: object not detected
Bit 2: sensor switching status on channel 2
1: object detected
0: object not detected
Bit 1: sensor switching status on channel 1
1: object detected
0: object not detected
Bit 0: sensor switching status on channel 0
1: object detected
0: object not detected
Assignment
Bit 0: sensor switching status on channel 0 Bit 0: sensor switching status on channel 0 Bit 0: sensor switching status on channel 0
1: object detected 1: object detected 1: object detected
0: object not detected 0: object not detected 0 object not detected
Bit 1 to bit 7:
Learned sensitivity/distance value
on channel 0 by Teach-in *
Assignment
"IQ-SENSE Opto"
Q_CH0 Q_CH0 Q CH0
TEACH_VAL_OUT
ET 200S Distributed I/O System
EWA-4NEB 780602402-12
Designation on
function block