ABB SACE Tmax XT2 User Manual page 69

PTC Function
PTC protects against engine overheating.
The alarm is supplied to the Trip unit by the Ekip CI module, which can be connected to a
thermocouple for controlling the motor temperature. If the measured temperature exceeds the
value of 120°C for more than one second the protection sends the TRIP command .
Parameters
Parameter
Enable
Trip Enable
1SDH002031A1002 ECN000092998
Description
Enables/disables protection and availability on menu of the
parameters
Activates/deactivates the open command: if disabled, the alarm
and the lapsing of the protection time are managed only as
information
Rev. B
Default
OFF
OFF
SACE Tmax XT2 – XT4 | 69