ABB SACE Tmax XT2 User Manual page 164

Remote From the service connector (via Ekip Connect) or with communication by system bus, it is
information possible to access additional information:
Information
HW and Boot version
Flash CRC status and
result
Publish enable
configuration
Configuration file
Security file
Certifying Revocation List
Executable file
Configuration error
Sample time
Log time
Upload time
Configured device
API events polling period
Connection client 1, 2, 3
Statistics
Plant side status
Status Cloud side
Application status
Status
1SDH002031A1002 ECN000092998
Description
general module information
information on the correctness of the SW in the module
Publish enable status contained in Security File
Name of the file dedicated to the information to be transmitted
(measurements, etc)
Name of the file dedicated to the information required by the
module for the transmission (addresses, certificates, etc)
name of file containing revoked certificates
name of the executable firmware executable file
error status of the module configuration
period of acquisition of data from the connected devices
period within which the acquired data are saved inside the log
period (calculated by module) that occurs between each data
transmission
Number of modules involved in the network with Hub module
period with which the module communicates with the API
device
Addresses of the TCP Modbus clients connected to the module
Recordings of the last saving operations and percentage of
resources being used
information on quality of the communication with the other
devices
Status of errors linked to the TLS session installed between the
module and the server
indicators of progress of the operations
general module indicators: SNTP status, flash, cable
connection, FW availability, file errors, etc
Rev. B
SACE Tmax XT2 – XT4 | 164