Menu - ABB SACE Tmax XT2 User Manual

11 - Menu

Introduction By pressing the Enter or ESC button on the main page it is possible to access the various menus
of the Trip unit.
Figure 13
Using the Enter, ESC, Right/Up, and Left/Down it is possible to navigate within the menus and
their respective submenus, which show:



Elements of each Each item in the submenus consists of:

item


Figure 14
Protections Menu In the Protections menu it is possible to configure the following protections
Name
L
S
S2
I
G
1SDH002031A1002 ECN000092998
Parameters that can be set
Information and measurements
Commands that can be executed
Submenu name
Current value (white text on a black background)
Other possible values (black text on a white background)
Parameters
List and description in the dedicated chapter
List and description in the dedicated chapter
List and description in the dedicated chapter
List and description in the dedicated chapter
(2)
List and description in the dedicated chapter
NOTES:
(1) if the Adaptive Protections package is available (page 65) and Dual Setting has
been enabled (page 65), an intermediate menu is made available before the list
of protections for the selection of the setting (Setting A / Setting B)
(2) available for LSIG versions
Rev. B
(1)
:
SW package Page
36
38
Standard
38
Protections
38
40
SACE Tmax XT2 – XT4 | 26