Accessories And Software - ABB SACE Tmax XT2 User Manual

5 - Accessories and software

The functions of Ekip Touch can be expanded with additional accessories and external modules
External
with different capabilities and installation methods.
accessories
The main external modules are:
Name
Ekip Supply
Ekip Com
Ekip Link
Ekip Signalling 2K
Ekip Signalling 3T
Ekip Synchrocheck
Ekip CI
These modules can be connected to the Trip unit using the DIN rail Ekip Cartridge (page 127):
and only if is not equipped any internal module.
Other external modules and accessories, available with direct connection to the internal terminal
board or to the rear connectors are:
Name
Ekip Signalling 10K
Ekip Multimeter
External neutral
Supervision, configuration, and reporting functions are also guaranteed with additional modules
for temporary power and communication:
Name
Ekip TT
Ekip T&P
Ekip Programming
Ekip Bluetooth Key
Internal The modules listed in the following table connect to the Trip unit and are housed in a specific slot
accessories inside the CB:
Name
Ekip Com
These modules can be connected to the Trip unit directly to the internal terminal board and only
if is not equipped any external module.
1SDH002031A1002 ECN000092998
Function
Supply
Communication (with various protocols)
Internal network communication with proprietary ABB
protocol
Signaling with input/output
Signaling with analogue inputs
Measurement of voltage and synchronization between two
power sources
Command module for motor applications
Function
Signaling with input/output
Display from the front of the panel
Neutral protection with CB 3P
Function
Power supply and testing
Power supply, communication, programming, and testing
Power supply, communication, and programming
Bluetooth communication and programming
Function
Communication (various protocols)
Rev. B
Page
130
131-147
151
161
169
161
169
Page
203
204
204
Page
203
Page
181
SACE Tmax XT2 – XT4 | 11