Ekip Supply - ABB SACE Tmax XT2 User Manual

39 - Ekip Supply

Ekip Supply is an accessory supply module, available in two different version depending by
supply voltage type and range.
Performs three functions:



The module has a power LED to signal the presence of an input supply:


Electrical
specifications
Model
Supply voltage
Frequency
Maximum power consumption without
accessories(1)
Maximum power consumption with accessories(2)
Maximum inrush current
Ekip Supply must be mounted in the first free slot of Ekip Cartridge.
Connections
Consult:
1SDH002031A1002 ECN000092998
supplies auxiliary supply to Ekip Touch
allows connectionto Trip unit and supply of modules mounted on Ekip Cartridge.
acts as a bridge for the Local Bus between Ekip Touch and the external electronic
accessories (es. Ekip Signalling 10K e Ekip Multimeter)
Off: no power supply
On (steady beam): powered up
NOTE:
(1) Ekip Touch with Ekip Supply only
(2) Ekip Touch with three modules mounted on Ekip Cartridge

the electrical diagrams for 1SDM000068R0001 for terminal references.
For external cabling, use AWG22-16 cables with a maximum external diameter of 1.4
mm

the instruction sheets 1SDH001000R0511 to connect the module to Ekip Touch.
Rev. B
Ekip Supply Ekip Supply
24-48VDC 110-240 VAC/DC
21,5 .. 53 VDC 105 .. 265 VAC/DC
-- 45 .. 66Hz
3 W 3 VA/W
10 W 10 VA/W
2 A for 20 ms 2 A for 20 ms
SACE Tmax XT2 – XT4 | 130