Others Accessories; Ekip Signalling 10K - ABB SACE Tmax XT2 User Manual

Others accessories

60 - Ekip Signalling 10K

Ekip Signalling 10K is an external accessory signalling module, which can be installed on a
standard 35 mm DIN guide (DIN EN 50022, type TS 35x15 mm).
The module has:



The module can be set in four different configurations


The module can can be supplied at 110-240 VAC / DC or 24-48 VDC.
More
http://www.abb.com/abblibrary/DownloadCenter/, document 1SDH001318R0002.
1SDH002031A1002 ECN000092998
Ten programmable output contacts.
Ten or eleven programmable digital inputs.
One startup LED and twenty or twenty-one signalling LEDs (one for each output/input).
One in the case of a connection to a bus link network.
Three configurations in the event of connection via Local Bus (to enable up to three modules
to be connected to the same release)
information on Ekip
IMPORTANT: make sure that you have read the safety requirements and
requirements regarding prevention of unauthorized accesses.
Rev. B
Signalling 10K is available on the
SACE Tmax XT2 – XT4 | 203
website