ABB SACE Tmax XT2 User Manual page 193

Information on If the module is detected correctly by Ekip Touch in the About-Modules menu the following
menu information is available:
Information
SN and version
IP address
Network Mask
Gateway
address
MAC Address
Cfg file
Error Cfg file
1SDH002031A1002 ECN000092998
Description
Identification and SW version of the module
Address of the module, assigned to the module by a DHCP server at the
moment of the connection to the network in the event of configuration
with dynamic IP or can be set by menu in the case of a static IP
NOTE: without a DHCP server, the module automatically
adopts a causal IP address in the interval 169.254.xxx.xxx
Subnet mask; identifies the method for recognizing the subnet to which
the modules belong and enables modules to be searched for within a
defined set of recipients
IP address of the node to which the module is connected, in the presence
of several subnets
Address assigned by ABB with OUI (Organizationally Unique Identifier)
equal to ac:d3:64 that identifies uniquely the manufacturer of an Ethernet
device
Name of the configuration file loaded in the modules
Error code of the configuration file (0 = no error)
Rev. B
SACE Tmax XT2 – XT4 | 193