ABB SACE Tmax XT2 User Manual page 146

Menu Activating the local bus is required to start communication between the module and Ekip Touch
and is available in the Settings menu (page 114).
If the module is detected correctly by Ekip Touch, the following information is available in the
About-Modules menu:
Information
SN and version
MAC Address
Remote From the service connector (via Ekip Connect) or with a system bus communication, additional
information information is available on the version and the status of the module: HW and Boot version, CRC
status (correctness of SW in the module).
1SDH002031A1002 ECN000092998
Description
Identification and SW version of the module
Address assigned by ABB with OUI (Organizationally Unique Identifier)
equal to ac:d3:64 that identifies uniquely the manufacturer of an
Ethernet device
Rev. B
SACE Tmax XT2 – XT4 | 146