ABB SACE Tmax XT2 User Manual page 160

Remote From the service connector (via Ekip Connect) or with communication by system bus, it is
information possible to access additional information:
Information
HW and Boot version
Flash CRC status and result
Ekip Link status
SNTP Server Error
SNTP Server Synchronisation
IEEE 1558 status
Remote Link Further link function parameters are available:
information
Information
Line Congruency detection
Remote programmable statuses
Remote programmable Word status
Zone logic selectivity
1SDH002031A1002 ECN000092998
Description
general module information
information on the correctness of the SW in the module
Signals connection errors of the Ethernet cable
Communication error with the SNTP server
Synchronism status with SNTP server
Valid with IEEE 1588 Master = ON, communicates the presence (Slave
or PTP Master Active) or absence (PTP Master but Passive) of a higher
level master
Description
Information on status and unsuitability of HW and logic
selectivity (status and unsuitable selectivity type)
(True/false) status of the remote programmable statuses A,
B, C and D
value of the remote programmable Word A, B, C, D
Statuses of the logic selectivity (inputs and outputs)
Rev. B
SACE Tmax XT2 – XT4 | 160