Beginning The Measurement - Agilent Technologies E5500A User Manual

Beginning the
Measurement
Figure 3-1
1. From the Measurement menu, choose New Measurement
2. When the Do you want to Perform a New Calibration and
Measurement dialog box appears, click Yes.
3. When the Connect Diagram dialog box appears, connect the 50 Ω
termination, provided with your system, to the Agilent/HP 70420A test
set's noise input connector. Refer to
for more information about the correct placement of the 50 Ω
page 3-8
termination.
Setup Diagram Displayed During the Confidence Test.
Agilent Technologies E5500 Phase Noise Measurement System 3-7
Your First Measurement
Making a Measurement
.
"Connect Diagram Example" on
50 Ω
termination
goes here.