At^spbg Read Current Phonebook Entries - Siemens TC35i User Manual

TC35i AT Command Set
14.7 AT^SPBG
14.7

AT^SPBG Read current Phonebook entries

This command can be used to display the phonebook records of the phonebook currently selected with
in sorted order by name. The sort order is described in
CAUTION: Please note that the sorted entries are assigned an index of their own which is not identical with the
location numbers used in the various phonebooks.
Therefore, the AT^SPBG command can be used for reading only. For example, it helps you find entries starting
with matching characters. However, do not use the listed index numbers to dial out or modify entries.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Test Command
AT^SPBG=?
Response(s)
^SPBG: (1- ),
<used> <nlength>
OK
ERROR
+CME ERROR
Write Command
[,
AT^SPBG=<index1>
Response(s)
[ ^SPBG: ,
<index1> <number>
[ ^SPBG: ,
<index2> <number>
OK
ERROR
+CME ERROR
PIN ASC0 MUX1
% % %
Reference(s)
SIEMENS
Command Description
The test command returns the index range for this command, the maximum length of
maximum length of
<text>
Note: The length may not be available while SIM storage is selected. If storage does not offer format information,
the format list should be empty parenthesises.
The write command selects the index of the phonebook entry, that is to be displayed, in the sorted list of phone-
book, or the range of indices to display.
TC35i_ATC_V02.07
Confidential / Released
,
<tlength>
]
<index2>
, ,
<type> <text>
, ,
<type> <text>
MUX2 MUX3
% %
field.
Page 356 of 439
Chapter 14.1, page 343"Sort order for Phonebooks"
]
]
s
m
obile
AT+CPBS
field, and the
<number>
1/30/04