Siemens TC35i User Manual page 292

TC35i AT Command Set
11.10 AT+CNMA
Notes
• The execute / write command shall only be used when
2+).
• Both the execute and the write command can be used no matter whether text mode or PDU mode is activated.
• If multiplex mode is activated (
channel fails to acknowledge an incoming message within the required time.
TC35i_ATC_V02.07
Confidential / Released
=0) the
AT+CMUX AT+CNMI
Page 292 of 439
parameter
AT+CSMS <service>
parameter will be set to zero on all channels, if one
s
m
obile
equals 1 (= phase
1/30/04