At+Cnma New Sms Message Acknowledge To Me/Te, Only Phase 2 - Siemens TC35i User Manual

TC35i AT Command Set
11.10 AT+CNMA
11.10 AT+CNMA New SMS message acknowledge to ME/TE, only
phase 2+
Syntax
Test Command
AT+CNMA=?
Response(s)
+CNMA: (list of supported
OK
Exec Command
AT+CNMA
Response(s)
OK
ERROR
+CMS ERROR
Write Command
AT+CNMA=<n>
Response(s)
OK
ERROR
+CMS ERROR
PIN ASC0 MUX1
% % %
Reference(s)
GSM 07.05
Command Description
The write / execute command confirms successful receipt of a new message (SMS-DELIVER or SMS-STATUS-
REPORT) routed directly to the TE. TA shall not send another +CMT or +CDS result code to TE until previous
one is acknowledged. If ME does not receive acknowledgment within required time (network time-out), ME sends
RP-ERROR to the network. TA shall automatically disable routing to TE by setting both
of to zero.
AT+CNMI
Parameter Description
(num)
<n>
0
TC35i_ATC_V02.07
Confidential / Released
s)
<n>
MUX2 MUX3
% %
Parameter is only required for PDU mode. Command operates similarly as in
text mode
Page 291 of 439
s
m
obile
and values
<mt> <ds>
1/30/04