At^spwd Change Password - Siemens TC35i User Manual

TC35i AT Command Set
5.7 AT^SPWD
5.7

AT^SPWD Change Password

Use this command when you want to change the passwords defined for the "facility lock" functions available from
. Specifically the command can be used to
AT+CLCK
• change PIN1 or PIN2,
• change the password supplied from your provider for the "call barring" supplementary service,
• set individual phone security passwords,
• enter the unblocking key (Master Phone Code) to restore a disabled "PS" password.
See AT commands
AT+CLCK
AT command is identical in every respect to
AT^SPWD
prefix is "^SPWD" instead of "+CPWD".
Syntax
Test Command
AT^SPWD=?
Response(s)
^SPWD: (list of supported (
OK
Write Command
AT^SPWD=<facility>
Response(s)
New password has been registered for the facility lock function.
OK
If parameter
<old password>
+CME ERROR 16 (+CME ERROR: incorrect password)
If the password for the selected
+CME ERROR ...
If error is related to ME functionality:
+CME ERROR
PIN ASC0 MUX1
% % %
Command Description
The test command returns a list of pairs which represent the available facilities and the maximum length of the
associated password.
The write command allows to define a new password for a password protected
password is a string of digits, the length of which varies with the associated
Note
• For further description please refer to
TC35i_ATC_V02.07
Confidential / Released
and for more information on the various lock features.
AT^SLCK
,
<facility> <password length>
, [,
<old password> <new password>
was not correct:
has been invalidated due to too many failed attempts:
<facility>
MUX2 MUX3
% %
AT+CPWD
Page 130 of 439
, except that the command syntax and response
AT+CPWD
)
]
.
s
m
lock function. Each
<facility>
.
<facility>
obile
1/30/04