Pocket Modem 56k
5.7
Remote Configuration (Remote Control)
5.7.1
Mode of Operation
Modem 1
(local modem)
To switch into the remote configuration mode, a data connection must
be established between the modems. A certain connection type is not
mandatory, we recommend, however, to use only error corrected
connections for remote configuration, to avoid transfer errors for the
commands.
The local modem is not required to master any remote configuration
type.
5.7.2
Remote Modem Preparation
Auto answer
Deactivate security callback
Release modem for remote configuration
Save entry
5.7.3
Change Default Password at Remote Modem
Change password
Enter old password
Enter new password
Re-enter new password
Dezember 05
Phone line
Modem 2
(remote modem)
ATS0=2
AT&Z1=
AT*R1
AT&W0
AT*C
OLD PASSWORD
QWERTY
NEW PASSWORD
Confirm
Function
AT&W1
17