Atd><Mem><N> Originate Call To Phone Number In Memory - Siemens TC35i User Manual

TC35i AT Command Set
7.3 ATD><mem><n>
7.3 ATD><mem><n> Originate call to phone number in memory
Syntax
Exec Command
[
ATD><mem><n> <mgsm>
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
PIN ASC0 MUX1
% % %
Reference(s)
V.25ter
Command Description
TA attempts to set up an outgoing call to the specified number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
(str)
<mem>
Phonebook storage:
For detailed description of storages see
"FD"
(&F)
"SM"
"ON"
"ME"
"LD"
"MC"
"RC"
TC35i_ATC_V02.07
Confidential / Released
];
MUX2 MUX3
§ §
.
AT+CPBS
Fixed dialing phonebook
SIM phonebook
MSISDN list
Mobile Equipment Phonebook
Last number dialed phonebook
Missed (unanswered received) calls list
Received calls list
Page 146 of 439
s
m
obile
1/30/04