Superscript Notation For Parameters And Values; Table 1.2: Symbols Used To Indicate The Correlations With Other Commands; Table 1.3: Symbols Used To Mark Different Types Of Default Values Of Parameters - Siemens TC35i User Manual

TC35i AT Command Set
1.3 Document conventions
1.3.2

Superscript notation for parameters and values

Table 1.2: Symbols used to indicate the correlations with other commands
Parameter option
(&W)
<param>
(&V)
<param>
(ˆSNFW)
<param>
(+CSCS)
<param>
Table 1.3: Symbols used to mark different types of default values of parameters
Value option
[x]
(&F)
x
(P)
x
(D)
x
TC35i_ATC_V02.07
Confidential / Released
Meaning
Parameter value will be stored with
Parameter value will be displayed with
Parameter value will be stored with
Parameter value has to be (is) coded according to current setting of
for details)
AT+CSCS
Meaning
Default value: if the parameter is omitted, the value 'x' will be assumed
Factory default value, will be restored to 'x' with
Powerup default value of a parameter which is not stored at power down
Delivery default value of a parameter which cannot be restored automatically
Page 15 of 439
s
AT&W
AT&V
AT^SNFW
AT&F
m
obile
(see
<chset>
1/30/04