At+Fbadmul Error Threshold Multiplier - Siemens TC35i User Manual

TC35i AT Command Set
10.3 AT+FBADMUL
10.3

AT+FBADMUL Error Threshold Multiplier

Syntax
Read Command
AT+FBADMUL?
Response(s)
<badmul>
OK
Write Command
AT+FBADMUL=<badmul>
Response(s)
OK
If error is related to ME functionality:
ERROR
PIN ASC0 MUX1
! % %
Reference(s)
EIA PN-2388
Command Description
This command defines the "Copy-Quality-OK" multiplier. The number of lines received with a bad pixel count is
multiplied by this number. If the result exceeds the total number of lines on the page the error rate is considered
too high. A threshold multiplier value of 20 corresponds to a 5 per cent error rate. A value of 0 implies that error
checking is not present or disabled.
Parameter Description
(num)
<badmul>
(P)
0...20 ...255
Note
• Used for Fax Class 2 only
TC35i_ATC_V02.07
Confidential / Released
MUX2 MUX3
! !
Page 247 of 439
s
m
obile
1/30/04