Siemens TC35i User Manual page 62

TC35i AT Command Set
3.1 AT+CMER
Unsolicited Result Code
+CIEV: <indDescr>,
A value of an indicator has changed.
Command Description
The read command returns the URC presentation mode
status .
<ind>
The write command enables and disables the presentation of "
refers to the name of a "
<indDescr>
registered indicator events will be issued to the TE.
Parameter Description
(num)(&W)
<mode>
(&F)
0
1
2
3
(num)
<keyp>
(&F)
0
(num)
<disp>
(&F)
0
(num)(&W)
<ind>
(&F)
0
2
(num)
<bfr>
(&F)
0
(str)
<indDescr>
Name of indicator; for a list of all supported indicators please refer to
(num)
<indValue>
Value of indicator; for a list of all values for the supported indicators please refer to
TC35i_ATC_V02.07
Confidential / Released
<indValue>
" indicator and
+CIEV
Discard " " URCs.
+CIEV
Discard " " URCs when TA-TE link is reserved, e.g. in online data mode.
+CIEV
Otherwise they are forwarded directly to the TE.
Buffer " " URCs in the TA while TA-TE link is reserved, e.g. in online data
+CIEV
mode, and flush them to the TE afterwards. Otherwise they are forwarded
directly to the TE.
Forward " " URCs directly to the TE. If TC35i is in online data mode,
+CIEV
URCs are signaled via sending BREAK (100ms) and stored in a buffer. Once
it is back in command mode e.g. after
buffer will be output.
Keypad event reporting is not supported by TC35i.
Display event reporting is not supported by TC35i.
Disable indicator event reporting.
Enable indicator event reporting.
TA buffer of URCs defined within this command is cleared when
is entered.
Page 62 of 439
and among others, the indicator event reporting
<mode>
:
+CIEV <indDescr>
is the new value of this indicator. All
<indValue>
was entered, all URCs stored in the
+++
and
AT+CIND
s
m
obile
, " URCs.
<indValue>
1..3
<mode>
.
AT^SIND
and .
AT+CIND AT^SIND
1/30/04