At^moni Monitor Idle Mode And Dedicated Mode - Siemens TC35i User Manual

TC35i AT Command Set
8.7 AT^MONI
8.7

AT^MONI Monitor idle mode and dedicated mode

Syntax
Test Command
AT^MONI=?
Response(s)
^MONI: (list of supported
OK
Exec Command
AT^MONI
Response(s)
See: 8.7.1
OK
Write Command
AT^MONI=<period>
Response(s)
See: 8.7.1
OK
PIN ASC0 MUX1
! % %
Reference(s)
SIEMENS
Command Description
The execute command can be used to retrieve the cell parameters of the serving/dedicated cell on request.
The write command can be used to retrieve information of the serving/dedicated cell automatically every
seconds. To stop the presentation type "AT" or "at".
<period>
Parameter Description
(num)
<period>
Display period in seconds
1...254
Notes
• The two header lines (see 8.7.1) are output after every ten data lines.
TC35i_ATC_V02.07
Confidential / Released
s)
<period>
MUX2 MUX3
% %
Page 199 of 439
s
m
obile
1/30/04