Siemens TC35i User Manual page 417

Terminal hardware interface
Hide thumbs Also See for TC35i:
Table of Contents

Advertisement

TC35i AT Command Set
18.2 List of *# Codes
Abbreviation
Meaning
BS
Basic service equivalent to parameter
class:
Voice
FAX
SMS
SMS+FAX
Voice+FAX
Voice+FAX+SMS
Data circuit asynchron
Data circuit synchron
PAD
Packet
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+synchron+PAD
All Services
T
Time in seconds
PW
Password
C
Character of TE character set (e.g. aster-
ics, hash or digit in case of USSD, or digits
in case of held calls or multiparty calls)
Possible responses
Parameter
Meaning
<m>
Mode: 0 = not active, 1 = active
<n>
Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
<status>
Status: 0 = not active, 1 = active
<class>
Represents BS = basic service. See Chapters
<fac>
Facility lock. See Chapter
<reason>
Call forwarding reason
For the exact specification of the format and parameters for *# strings, please refer to GSM 02.30, Annex C, and
GSM 02.04, Table 3.2.
Function of *# codes for Supplementary Services:
*# Code
Abbreviations used in Chapter
*
act
**
reg
*#
int
TC35i_ATC_V02.07
Confidential / Released
AT+CCFC
.
AT+CLCK
List of *# Codes
Page 417 of 439
s
Value
11
13
16
12
19
10
25
24
27
26
21
22
20
--
In contrast to AT Command
parameter T has no default value. If T is not
specified, an operator defined default or
the last known value may be used, depend-
ing on the network operator.
--
--
,
and 1.5.1.
AT+CLCK
Function
Activate (except for CLIR, see list above)
Register and activate
Check status (interrogate)
m
obile
,
AT+CCFC
1/30/04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc35i terminal

Table of Contents