Atq Set Result Code Presentation Mode - Siemens TC35i User Manual

TC35i AT Command Set
2.4 ATQ
2.4

ATQ Set result code presentation mode

Syntax
Exec Command
ATQ [ ]
<n>
Response(s)
If =0:
<n>
OK
If =1:
<n>
(none)
PIN ASC0 MUX1
! % %
Reference(s)
V.25ter
Command Description
This parameter setting determines whether or not the TA transmits any result code to the TE. Information text
transmitted in response is not affected by this setting.
Parameter Description
(num)(&W)(&V)
<n>
(&F)
[0]
1
TC35i_ATC_V02.07
Confidential / Released
MUX2 MUX3
% %
DCE transmits result code
Result codes are suppressed and not transmitted
Page 33 of 439
s
m
obile
1/30/04