Siemens TC35i User Manual page 357

TC35i AT Command Set
14.7 AT^SPBG
If no is given, only the entry at
<index2>
Parameter Description
(num)
<index1>
The first index number within the sorted list of phonebook for which the corresponding entry is to be displayed.
The supported range is given in the test command response.
If <index 1> exceeds the upper bound
(num)
<index2>
The last index number within the sorted list of phonebook for which the corresponding entry is to be displayed.
The supported range is given in the test command response.
If both and
<index1> <index2>
of entries will be output and terminated with OK.
If exceeds the range indicated by the test command in parameter
<index2>
output but terminated with a +CME ERROR 21 "INVALID INDEX".
(str)
<number>
String type phone number in format specified by
The number parameter may be an empty string.
(num)
<type>
type of address octet
145
209
129
(str)(+CSCS)
<text>
Text assigned to the phone number. The maximum length for this parameter is given in test command response
.
<tlength>
(num)
<used>
value indicating the number of used locations in selected memory storage.
(num)
<nlength>
Max. length of phone number for "normal" locations. - Depending on the storage, a limited number of locations
with extended memory is available per phonebook. Please refer to AT command
(num)
<tlength>
Max. length of assigned to the telephone number. The value indicated by the test command is given in
<text>
octets. If the string is given in GSM characters, each character corresponds to one octet. If the
<text>
string is given in UCS2, the maximum number of characters depends on the coding scheme used for the alpha
field of the SIM according to GSM 11.11, Annex B. In the worst case, the number of UCS2 characters is less
than half the number of GSM characters. For a detailed description see GSM 11.11, Annex B.
TC35i_ATC_V02.07
Confidential / Released
will be displayed.
<index1>
, the AT command will return a CME ERROR 21.
<used>
are in the range indicated by the test command in parameter
.
<type>
dialling string
<number>
dialling string
<number>
ters saved with the number string.
For further detail, check the parameter descriptions for at command
otherwise
Page 357 of 439
<used>
includes international access code character '+'
contains printable non-alphabetic non-digit charac-
AT+CPBW
s
m
obile
, the list
<used>
, the list of entries will be
.
AT+CPBW
for detail.
<text>
1/30/04