Siemens TC35i User Manual page 387

TC35i AT Command Set
15.15 AT^SNFS
Examples
EXAMPLE 1
Suppose a user wishes to use alternatively a handsfree device and a handset. The handset can be connected
to the first analog interface and adjusted to audio mode 4. The handsfree device can be attached to the sec-
ond analog interface and adjusted to audio mode 2. The factory defaults of
Settings for the handset:
AT^SNFS=4
OK
AT^SAIC?
^SAIC: 2,1,1
OK
Settings for the handsfree device:
AT^SNFS=2
OK
AT^SAIC?
^SAIC: 2,2,2
OK
To store the configuration to the user defined audio profile:
AT^SNFW
OK
To switch back and forth:
AT^SNFS=4
OK
AT^SNFS=2
OK
EXAMPLE 2
The following example illustrates a combination of a handset and a handsfree device connected to other inter-
faces than those assumed as factory default.
Settings for a handset connected to the second analog interface and adjusted to audio mode 4:
AT^SNFS=4
OK
AT^SAIC=2,2,2
OK
TC35i_ATC_V02.07
Confidential / Released
Factory default of AT^SAIC assigned to audio mode 4.
Factory default of AT^SAIC assigned to audio mode 2.
Stores the audio mode and the interface.
Switches to the handset connected to analog interface 1.
Switches to the handsfree device at analog interface 2.
Page 387 of 439
s
m
obile
need not be changed.
AT^SAIC
1/30/04