Siemens TC35i User Manual page 110

TC35i AT Command Set
5.1 AT+CPIN
If no PIN request is pending (for example if PIN authentication has been done and the same PIN is entered again)
ME responds +CME ERROR: operation not allowed. No action is required from your part.
Parameter Description
(str)
<pin>
Password (string type), usually SIM PIN1.
If the requested password was a PUK, such as SIM PUK1 or PH-SIM PUK or PH-FSIM PUK or another pass-
word, then must be followed by
<pin>
(text)
<new pin>
if the requested code was a PUK: specify a new password or restore the former disabled password. See
for more information about when you may need to enter the PUK.
(text)
<code>
SIM PIN authentication
READY
SIM PIN
SIM PUK
SIM PIN2
SIM PUK2
Phone security locks set by client or factory
PH-SIM PIN
PH-SIM PUK
PH-FSIM PIN
PH-FSIM PUK
PH-NET PIN
PH-NET PUK
PH-NS PIN
PH-NS PUK
PH-SP PIN
TC35i_ATC_V02.07
Confidential / Released
.
<new pin>
PIN has already been entered. No further entry needed.
ME is waiting for SIM PIN1.
ME is waiting for SIM PUK1 if PIN1 was disabled after three failed attempts to
enter PIN1.
ME is waiting for PIN2, when the attempt to access PIN2 requiring features was
acknowledged with +CME ERROR:17 (e.g. if client attempts to edit the FD
phonebook). This is only applicable if the AT+CPIN read command also
prompts for SIM PIN2. Normally, the AT+CPIN2 command is intended for SIM
PIN2.
ME is waiting for PUK2 to unblock a disabled PIN2. Necessary if preceding
command was acknowledged with error +CME ERROR:18 and only if the
AT+CPIN read command also prompts for SIM PUK2. Normally, the
AT+CPIN2 command is intended for SIM PUK2.
ME is waiting for phone-to-SIM card password if "PS" lock is active and user
inserts other SIM card than the one used for the lock. ("PS" lock is also referred
to as phone or antitheft lock).
ME is waiting for Master Phone Code, if the above "PS" lock password was
incorrectly en-tered three times.
ME is waiting for phone-to-very-first-SIM card. Necessary when "PF" lock was
set. When powered up the first time, ME locks itself to the first SIM card put into
the card holder. As a result, operation of the mobile is restricted to this one SIM
card (unless the PH-FSIM PUK is used as described below).
ME is waiting for phone-to-very-first-SIM card unblocking password to be
given. Necessary when "PF" lock is active and other than first SIM card is
inserted.
ME is waiting for network personalisation password
ME is waiting for network personalisation unblocking password
ME is waiting for network subset personalisation password
ME is waiting for network subset unblocking password
ME is waiting for service provider personalisation password
Page 110 of 439
s
m
obile
5.1.1
1/30/04