At^sset Indicate Sim Data Ready - Siemens TC35i User Manual

TC35i AT Command Set
12.3 AT^SSET
12.3

AT^SSET Indicate SIM data ready

After power on and personalization (PIN entry if required) the ME starts reading data from SIM. With this com-
mand it is possible to enable URC "
cess has been completed. Afterwards all commands that depends on SIM data fields can be used, e.g. the SMS
and phone book commands.
setting is storable via
AT^SSET
Syntax
Test Command
AT^SSET=?
Response(s)
^SSET: (list of supported
OK
Read Command
AT^SSET?
Response(s)
^SSET: <n>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SSET= [ ]
<n>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1
! % %
Reference(s)
SIEMENS
Unsolicited Result Code
^SSIM READY
The URC acknowledges to the user that SIM data is accessible. Before that, any attempt to access one of the
phonebooks, view SMS or access SIM data will result in "+CME ERROR: 14" (SIM busy).
TC35i_ATC_V02.07
Confidential / Released
" indication on the corresponding serial channel when this pro-
^SSIM READY
.
AT&W
s)
<n>
MUX2 MUX3
% %
Page 331 of 439
s
m
obile
1/30/04