At+Cpbs Select Phonebook Memory Storage - Siemens TC35i User Manual

TC35i AT Command Set
14.3 AT+CPBS
14.3

AT+CPBS Select phonebook memory storage

This command is used to select the active phonebook storage, i.e. the phonebook storage that all subsequent
phonebook commands will be operating on.
The read command can be used only after the phonebook data from the SIM have been read successfully for
the first time. Reading starts after successful SIM authentication has been performed, and may take up to 30
seconds depending on the SIM used. While the read process is in progress, an attempt to use any of the phone-
book commands will result in "+CME Error: 14" (SIM busy).
Syntax
Test Command
AT+CPBS=?
Response(s)
+CPBS: (list of supported
OK
+CME ERROR
Read Command
AT+CPBS?
Response(s)
,
+CPBS: <storage> <used>
OK
+CME ERROR
Write Command
AT+CPBS=<storage>
Response(s)
OK
+CME ERROR:
PIN ASC0 MUX1
% % %
Reference(s)
GSM07.07
Command Description
The test command returns supported
The read command returns the currently selected
number of entries available for this storage.
TC35i_ATC_V02.07
Confidential / Released
s)
<storage>
,
<total>
MUX2 MUX3
% %
s as compound value.
<storage>
<storage>
Page 347 of 439
s
, the number of entries and the
<used>
m
obile
<total>
1/30/04