Combining At Commands On The Same Command Line - Siemens TC35i User Manual

TC35i AT Command Set
1.4 AT command syntax
Example 1: Omitting parameters in the middle of a string
AT+CCUG?
+CCUG: 1,10,1
OK
AT+CCUG=,9
OK
AT+CCUG?
+CCUG: 1,9,1
OK
Example 2: Using default parameter values for optional parameters
AT+CFUN=5,0
OK
AT+CFUN?
+CFUN: 5
OK
AT+CFUN=
OK
+CFUN: 1
OK
1.4.2

Combining AT commands on the same command line

You may enter several AT commands on the same line. This eliminates the need to type the "AT" or "at" prefix
before each command. Instead, it is only needed once at the beginning of the command line. Use a semicolon
as command delimiter.
The command line buffer accepts a maximum of 391 characters. If this number is exceeded none of the com-
mands will be executed and TA returns ERROR.
The table below lists the AT commands you cannot enter together with other commands on the same line. Oth-
erwise, the responses may not be in the expected order.
AT command type
V.25ter commands
GSM 7.07 commands
GSM 7.05 commands (SMS)
Commands starting with AT&
AT+IPR
Note: When concatenating AT commands please keep in mind that the sequence of processing may be different
from the sequential order of command input. Therefore, if the consecutive order of the issued commands is your
concern, avoid concatenating commands on the same line.
TC35i_ATC_V02.07
Confidential / Released
Query current setting
Set only the middle parameter
Query new setting
Activate CYCLIC SLEEP mode, don't reset ME
Query ME mode
Set ME back to normal (default parameters: 1,0)
Comment
with FAX commands (Prefix AT+F)
with Siemens commands, Prefix AT^S)
To be used standalone
To be used standalone
To be used standalone
Page 17 of 439
s
m
obile
1/30/04