At^spbd Purge Phonebook Memory Storage - Siemens TC35i User Manual

Terminal hardware interface
Hide thumbs Also See for TC35i:
Table of Contents

Advertisement

TC35i AT Command Set
14.6 AT^SPBD
14.6

AT^SPBD Purge phonebook memory storage

This command is used to purge the selected phonebook
in the selected phonebook storage will be deleted.
CAUTION! The operation cannot be stopped nor reversed!
Automatic purging of phonebooks is performed when the SIM card is removed and replaced by a different SIM
card. This affects the ME-based part of the "LD" storage, and storages "MC" and "RC". Storage "ME" is not
affected.
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Test Command
AT^SPBD=?
Response(s)
^SPBD: list of supported
OK
+CME ERROR
Write Command
AT^SPBD=<storage>
Response(s)
OK
+CME ERROR
PIN
ASC0
MUX1
%
%
%
Reference(s)
SIEMENS
Command Description
The test command returns a list of supported
The write command is used to select the phonebook
TC35i_ATC_V02.07
Confidential / Released
s
<storage>
MUX2
MUX3
%
%
<storage>
Page 354 of 439
manually, i.e. all entries previously stored
<storage>
s.
to purge.
<storage>
s
m
obile
1/30/04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc35i terminal

Table of Contents