Siemens TC35i User Manual page 157

TC35i AT Command Set
7.10 AT^SHUP
(num)
<cn>
call number
The "call number" is an optional index into the list of current calls available via
will terminate the call identified by the specified call number. The default call number "0" is not assigned to any
call, but signifies "all calls". As "0" is the default value, it may be omitted.
With , Calls will be terminated regardless of their current call status, which may be any of the states
AT^SHUP
allowed by .
AT+CLCC
[0]
1...7
Notes
• it depends on the network whether or not a delivered release cause will be forwarded to the remote party.
• With , Calls will be terminated regardless of their current call status, which may be any of the states
AT^SHUP
allowed by .
AT+CLCC
TC35i_ATC_V02.07
Confidential / Released
terminate all known calls
terminate the specific call number
Page 157 of 439
s
. AT command
AT+CLCC
<cn>
m
obile
AT^SHUP
1/30/04