At^monp Monitor Neighbour Cells - Siemens TC35i User Manual

TC35i AT Command Set
8.8 AT^MONP
8.8

AT^MONP Monitor neighbour cells

Syntax
Test Command
AT^MONP=?
Response(s)
^MONP: (list of supported
OK
Exec Command
AT^MONP
Response(s)
See: 8.8.1
OK
Write Command
AT^MONP=<period>
Response(s)
See: 8.8.1
OK
PIN ASC0 MUX1
! % %
Reference(s)
SIEMENS
Command Description
This command can be used to obtain information of up to six neighbour cells on request.
This command can be used to retrieve information of up to six neighbour cells automatically every n seconds.
To stop the presentation type "at" or "AT".
Parameter Description
(num)
<period>
Display period in seconds
1...254
Note
• Due to the fact that not all necessary information of the neighbour cells can be decoded during a connection,
TC35i_ATC_V02.07
Confidential / Released
s)
<period>
MUX2 MUX3
% %
Page 203 of 439
s
m
obile
1/30/04