Siemens TC35i User Manual page 221

TC35i AT Command Set
9.5 AT+CCUG
Parameter Description
(num)
<n>
explicit CUG invocation options
(D)
0
1
(num)
<index>
0-9
(D)
10
(num)
<info>
state of the call
(D)
0
1
2
3
Notes
• The active settings for omitted parameters are retained without changes.
• Explicit CUG invocation means that at each call setup, CUG information is added to the called number.
• Upon delivery, settings are predefined with
=0,
<n>
=10,
<index>
=0.
<info>
These delivery defaults cannot be recalled automatically.
• When starting a call with
for this single call is identical to the option already selected with
• Current settings are saved in the ME automatically.
• or do not influence the current settings.
ATZ AT&F
• some combinations of parameters may lead to rejection of CUG calls by the network. For more information,
please consult GSM 04.85
TC35i_ATC_V02.07
Confidential / Released
Deactivate explicit CUG invocation
Activate explicit CUG invocation
explicit selection of CUG index
No index (preferred CUG taken from subscriber data)
no information
suppress outgoing access
suppress preferential CUG
Suppress preferential CUG and Outgoing Access.
, Parameter 'G' or 'g' of command
ATD
Page 221 of 439
s
will have no effect if the option selected
ATD
.
AT+CCUG
m
obile
1/30/04