TC35i AT Command Set
4.8 AT+IFC
4.8
AT+IFC Set Flow Control separately for data directions
The command
can be used to set or query the data flow control separately for each data direction.
AT+IFC
Syntax
Test Command
AT+IFC=?
Response(s)
+IFC: (list of supported
OK
Read Command
AT+IFC?
Response(s)
+IFC:
<TEflowcontrol>
OK
Write Command
AT+IFC=<TEflowcontrol>
Response(s)
OK
ERROR
PIN
ASC0
MUX1
!
%
§
Reference(s)
V.25ter
Command Description
The test command returns the values of the supported methods of flow control.
The read command returns the currently selected methods of flow control.
The write command determines the data flow control on the serial interface.
Parameter Description
(num)(&W)
<TEflowcontrol>
Specifies the method used by the TE when receiving data from the TA.
[0]
TC35i_ATC_V02.07
Confidential / Released
s), (list of supported
<TEflowcontrol>
,
<TAflowcontrol>
,
<TAflowcontrol>
MUX2
MUX3
§
§
none
Page 96 of 439
s
s)
<TAflowcontrol>
m
obile
1/30/04