Siemens TC35i User Manual page 238

TC35i AT Command Set
9.11 AT+CPUC
(str)
<ppu>
Price per unit; dot is used as a decimal separator (e.g. "2.66"). The length is limited to 20 characters. If the string
length is exceeded, the command is terminated with an error. This string may only contain digits and a dot. Lead-
ing zeros are removed from the string. The minimum and maximum value are determined by the structure of the
SIM-PUCT file. The maximum price per unit value is 999 999 999.00. When successfully entered, this value is
rounded to maximum accuracy.
Note: Due to storage in mantisse (range 0-4095) and exponent (-7 to 7) it is possible that rounding errors occur.
(str)
<passwd>
SIM PIN2. String parameter which can contain any combination of characters. The maximum string length is
limited to 8 characters. If this value is exceeded, the command terminates with an error message. If the PIN2 is
incorrect, a CME error (+CME ERROR: incorrect password) is output.
Example
To change currency and/or price per unit you have two ways:
You can enter PIN2 along with the
AT+CPUC="EUR","0.10","8888"
OK
Alternatively, you can first use the
mand, subsequently, take into account that PIN2 authentication expires after 300ms (see notes in
AT+CPUC="EUR","0.10"
OK
AT+CPUC="EUR","0.10"
+CME ERROR: SIM PIN2 required
TC35i_ATC_V02.07
Confidential / Released
command:
AT+CPUC
(where "8888" = PIN2)
command to enter PIN2. When you execute the
AT+CPIN2
Successful
Attempt not successful. PIN2 authentication has
expired.
Page 238 of 439
s
m
obile
com-
AT+CPUC
).
AT+CPIN2
1/30/04