Atx Set Connect Result Code Format And Call Monitoring - Siemens TC35i User Manual

TC35i AT Command Set
2.6 ATX
2.6

ATX Set CONNECT result code format and call monitoring

Syntax
Exec Command
ATX [ ]
<value>
Response(s)
OK
PIN ASC0 MUX1
! % %
Reference(s)
V.25ter
Command Description
This parameter setting determines whether or not the TA detects the presence of dial tone and busy signal and
whether or not TA transmits particular result codes.
Parameter Description
(num)(&W)(&V)
<value>
[0]
1
2
3
(&F)
4
TC35i_ATC_V02.07
Confidential / Released
MUX2 MUX3
% %
CONNECT result code only returned, dial tone and busy detection are both dis-
abled.
CONNECT result code only returned, dial tone and busy detection are
<text>
both disabled.
CONNECT result code returned, dial tone detection is enabled, busy
<text>
detection is disabled.
CONNECT result code returned, dial tone detection is disabled, busy
<text>
detection is enabled.
CONNECT result code returned, dial tone and busy detection are both
<text>
enabled.
Page 36 of 439
s
m
obile
1/30/04