At^smso Switch Off Mobile Station - Siemens TC35i User Manual

TC35i AT Command Set
2.10 AT^SMSO
2.10

AT^SMSO Switch off mobile station

Syntax
Test Command
AT^SMSO=?
Response(s)
OK
Exec Command
AT^SMSO
Response(s)
^SMSO: MS OFF
OK
PIN ASC0 MUX1
! % %
Reference(s)
SIEMENS
Unsolicited Result Code
^SHUTDOWN
Indicates that the power-off procedure is finished and the module will be switched off within 1 second
Command Description
The exec command initiates the power-off procedure. Low level of the module's VDD pin and display of URC
" " verifies that the procedure has completed and the module has entered the POWER DOWN mode.
^SHUTDOWN
Therefore, be sure not to disconnect the operating voltage until VDD is low or until URC "
played . Otherwise, you run the risk of losing data. For further details on how to turn off the module see the [2].
Notes
• Do not send any command after this command.
• If AT^SMSO is entered on one of the Multiplexer channels the ME closes the Multiplexer channels, terminates
the Multiplexer and deactivates all other functions. Then, the URC "
ical serial interface (ASC0). The URC will be transmitted at the bit rate last activated on ASC0 for use with
the Multiplex driver.
TC35i_ATC_V02.07
Confidential / Released
MUX2 MUX3
% %
Page 44 of 439
s
^SHUTDOWN
" will be issued on the phys-
^SHUTDOWN
m
obile
" is dis-
1/30/04