At+Cpin2 Enter Pin2 - Siemens TC35i User Manual

TC35i AT Command Set
5.2 AT+CPIN2
5.2

AT+CPIN2 Enter PIN2

Syntax
Test Command
AT+CPIN2=?
Response(s)
OK
Read Command
AT+CPIN2?
Response(s)
+CPIN2: <code>
OK
ERROR
+CME ERROR: <err>
Write Command
[,
AT+CPIN2=<pin> <new pin>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1
% % %
Reference(s)
GSM 07.07
Command Description
The read command returns an alphanumeric string indicating whether some password is required or not.
The write command lets the ME store the entered password. This may be for example the SIM PIN2 to benefit
from the features listed below, or the SIM PUK2 to replace a disabled PIN2 with a new one. Note that PIN2 can
only be entered if PIN1 authentication was done.
If the ME is requesting SIM PUK2, use
PIN2.
Parameter Description
(str)
<pin>
Password (string type), usually SIM PIN2 or, if requested, SIM PUK2.
TC35i_ATC_V02.07
Confidential / Released
]
MUX2 MUX3
% %
to enter the PUK2, followed by
<pin>
Page 113 of 439
s
m
obile
to specify your new
<new pin>
1/30/04