At+Fbadlin Bad Line Treshold - Siemens TC35i User Manual

TC35i AT Command Set
10.2 AT+FBADLIN
10.2

AT+FBADLIN Bad Line Treshold

Syntax
Read Command
AT+FBADLIN?
Response(s)
<badlin>
OK
Write Command
AT+FBADLIN=<badlin>
Response(s)
OK
If error is related to ME functionality
ERROR
PIN ASC0 MUX1
! % %
Reference(s)
EIA PN-2388
Command Description
This command defines the Copy-Quality-OK-threshold. If
in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If
pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK"
occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies
that error checking is not present or disabled.
Parameter Description
(num)
<badlin>
bad lines
(P)
0...10 ...255
Note
• Used for Fax Class 2 only
TC35i_ATC_V02.07
Confidential / Released
MUX2 MUX3
! !
Page 246 of 439
consecutive lines have pixel count errors
<badlin>
<badlin>
s
m
obile
* 2 consecutive lines have
1/30/04