Siemens TC35i User Manual page 112

Terminal hardware interface
Hide thumbs Also See for TC35i:
Table of Contents

Advertisement

TC35i AT Command Set
5.1 AT+CPIN
is an 8-digit device code associated to the IMEI number of the mobile which can only by obtained from the man-
ufacturer or provider. When needed, contact Siemens AG and request the Master Phone Code of the specific
module.
There are two ways to enter the Master Phone code:
You can enter
AT+CPIN
You can use the
ATD
Usually, the Master Phone Code will be supplied by mail or e-mail. If the received number is enclosed in the *#
codes typically used for the
appended #.
Example: You may be given the string *#0003*12345678#. When prompted for the PH-SIM PUK simply enter
12345678.
If incorrectly input, the Master Phone Code is governed by a specific timing algorithm: (n-1)*256 seconds (see
table below). The timing should be considered by system integrators when designing an individual MMI.
Number of failed attempts
1st failed attempt
2nd failed attempt
3rd failed attempt
4th failed attempt
5th failed attempt
6th failed attempt and so forth
SIM locks:
These are factory set locks, such as "PF", "PN", "PU", "PP", "PC". An 8-digit unlocking code is required to operate
the mobile with a different SIM card, or to lift the lock. The code can only be obtained from the provider.
Failure to enter the password is subject to the same timing algorithm as the Master Phone Code (see Table
above).
Call barring:
Supported modes are "AO", "OI", "OX", "AI", "IR", "AB", "AG", "AC". If the call barring password is entered incor-
rectly three times, the client will need to contact the service provider to obtain a new one.
Summary of related chapters:
Related +CME errors are listed in 2.12.1. For further instructions and examples see
and
. A complete list of *# codes is provided in
AT+CPWD
AT^SPWD
TC35i_ATC_V02.07
Confidential / Released
=Master Phone Code,new password.
command followed by the GSM code *#0003*Master Phone Code#;.
option, it is important to crop the preceding *#0003* characters and the
ATD
Page 112 of 439
Time to wait before next input is allowed
No time to wait
4 seconds
3 * 256 seconds
4 * 256 seconds
5 * 256 seconds
6 * 256 seconds and so forth
List of *# Codes
s
m
obile
,
,
AT+CLCK
AT^SLCK
.
1/30/04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc35i terminal

Table of Contents