Siemens TC35i User Manual page 330

TC35i AT Command Set
12.2 AT^SCKS
The write command enables or disables the presentation of URCs to report whether or not the SIM card is con-
nected.
If the ME is powered down or reset (
not be retained. Therefore the setting
in the user profile ( ).
AT&W
Parameter Description
(num)(&W)(&V)
<mode>
(&F)
0
1
(num)(&V)
<SimStatus>
0
1
Note
• reflects the status of the SIM and the card holder tray. Therefore if an empty SIM card tray is
<SimStatus>
inserted, two URCs will be presented, indicating the status 1 followed by 0, i.e. a SIM is inserted into the card
holder tray but no SIM connection could be established.
Example
AT^SCKS=1
OK
Now, after inserting an empty card tray the following URCs appear:
^SCKS: 1
^SCKS: 0
TC35i_ATC_V02.07
Confidential / Released
or
AT+CFUN AT^SMSO
=1 needs to be restored after power on the TC35i or may be saved
<mode>
Suppress unsolicited result codes
Output unsolicited result codes
Card holder tray removed or SIM connection error
SIM inserted(refer to note)
Activates the presentation of unsolicited result codes
Tray connected
No SIM card found
Page 330 of 439
) the current presentation mode setting
s
m
obile
will
<mode>
1/30/04