Siemens TC35i User Manual page 60

TC35i AT Command Set
2.15 AT^SM20
Parameter Description
(num)
<CallMode>
Call setup response mode
Applies only to voice calls.
0
(&F)
1
(num)
<CmgwMode>
Response mode for sending and writing short messages
Applies to the sms commands like e.g.
0
(&F)
1
TC35i_ATC_V02.07
Confidential / Released
Set compatibility to Siemens mobile phones.
ME will return "OK" immediately after attempting a call with the
In case of failure, additional call release indications, such as "NO DIAL TONE,
"NO CARRIER", "BUSY" will follow.
Default call setup mode, compatible to M20.
ME will return "OK" in case of a successful connection, otherwise one of the
call release indications "NO DIAL TONE, "NO CARRIER", "BUSY" are indi-
cated.
and
AT+CMGS AT+CMGW
Set compatibility to Siemens mobile phones.
ME will return +CMS ERROR: <err> when writing or sending of short mes-
sages fails.
Default mode for sending and writing short messages, compatible to M20.
ME will return "OK", no matter whether or not sms command was successfully
executed.
Page 60 of 439
s
command.
m
obile
command.
ATD
1/30/04