At+Cpbr Read From Phonebook - Siemens TC35i User Manual

Terminal hardware interface
Hide thumbs Also See for TC35i:
Table of Contents

Advertisement

TC35i AT Command Set
14.2 AT+CPBR
14.2

AT+CPBR Read from Phonebook

This command serves to read one or more entries from the phonebook selected with AT command
It can be used only after the phonebook's data has been read from the SIM successfully. Reading starts after
successful SIM authentication has been performed and may take up to 30 seconds depending on the SIM used.
While this read process is in progress, an attempt to use any of the phonebook commands will result in "+CME
Error: SIM busy". To determine when the initial phonebook reading has been finished the URC "^SSIM READY"
shall be used, refer
AT^SSET
Syntax
Test Command
AT+CPBR=?
Response(s)
+CPBR: (1-
),
<maxloc>
OK
+CME ERROR
Write Command
AT+CPBR=<location1>
Response(s)
[ +CPBR:
<location1>
[ +CPBR:
<location2>
OK
+CME ERROR
PIN
ASC0
MUX1
%
%
%
Reference(s)
GSM 07.07, GSM 11.11
Command Description
The test command returns the location range supported by the current phonebook storage, the maximum length
of
field and the maximum length of
<number>
SIM storage is selected. If storage does not offer format information, the format list contains empty parenthe-
sizes.
The write command determines the phonebook entry to be displayed with
from
to
<location1>
<location2>
be displayed.
If no entries are found at the selected location "OK" will be returned.
TC35i_ATC_V02.07
Confidential / Released
.
,
<nlength>
<tlength>
[,
]
<location2>
,
,
,
<number>
<type>
<text>
,
,
,
<number>
<type>
<text>
MUX2
MUX3
%
%
<text>
. Hence, if no
Page 344 of 439
]
]
field. Note: Length information may not be available while
<location1>
is given only the entry at
<location2>
s
m
obile
.
AT+CPBS
or a location range
will
<location1>
1/30/04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tc35i terminal

Table of Contents