At+Cmut Mute Control - Siemens TC35i User Manual

TC35i AT Command Set
15.5 AT+CMUT
15.5

AT+CMUT Mute control

Syntax
Test Command
AT+CMUT=?
Response(s)
+CMUT: (list of supported
OK
Read Command
AT+CMUT?
Response(s)
+CMUT: <mute>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CMUT=<mute>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1
! % %
Reference(s)
GSM 07.07
Command Description
This command can be used in all audio modes (1 to 6) and during a voice call only. See
on the various audio modes. As alternative, you can use the
should be aware that when they switch back and forth between different audio modes (for example handsfree
on/off) the value of
<mute>
Parameter Description
(num)
<mute>
(P)
0
1
TC35i_ATC_V02.07
Confidential / Released
s)
<mute>
MUX2 MUX3
% %
does not change, i.e. the microphone mode is retained until explicitly changed.
mute off
mute on
Page 369 of 439
s
AT^SNFS
command. During an active call, users
AT^SNFM
m
obile
for more details
1/30/04