Memory Switch Setting Method (Advanced) - Brother RH-9820 Service Manual

2-3. Memory switch setting method (Advanced)

The settings for the memory switches are valid for all programs.
1
While pressing the TEST key and the PROGRAM key, push the POWER switch at the ON side (1).
0598B
2
Select the number (A) for the memory switch that you would like to change the setting for.
0413B
3
Change the memory switch setting (B).
0414B
4
Apply the changed setting.
0415B
5
Repeat steps 2 to 4 above to change other memory switch settings.
6
[To exit memory switch mode]
0448B
* The mode will switch to memory switch mode.
* The memory switch number (A) will appear in the top part of
the display, and the setting (B) for that number will appear in
the bottom part of the display.
* If you press and hold the F key while pressing the
time, only the memory switches whose current setting values are
different from the default values will appear.
* If you would like to return the setting which is currently being displayed
to the default value, press the RESET key.
* If the memory switch setting is different from the original setting, the
display will flash.
The setting for the memory switch will be stored and (B) will stop flashing
and illuminate steadily.
NOTE:
The changed settings will be enabled after memory switch mode has been
exited.
Normal sewing machine operation will then be possible.
RH-9820
2. FUNCTION SETTINGS
(A)
(B)
(A)
(B)
or
0322B
key at this
0323B
4