Removal Of The Bowden Cable; Removal Of The Engine From Kart Chassis - Rotax 125 MAX evo Repair Manual

REMOVAL OF THE BOWDEN CABLE

Instruction Proceed as follows to remove the Bowden cable:
1. Remove the carburetor cover (1).
2. Release the nipple screw from the slide.
3. Disconnect the Bowden cable (2) from the nipple screw (3).
Figure 3.5: Bowden cable
______________________________________________________

REMOVAL OF THE ENGINE FROM KART CHASSIS

General Loosen the engine from chassis following the chassis manufacturer's instruction.
Remove both screws (engine clamps) and disconnect all cables.
N N O O T T E E
The engine m m u u s s t t n n o o t t be removed from the chassis to repair the following parts:
• Centrifugal clutch
• Cylinder with combustion chamber insert and cylinder head cover
• Exhaust valve
• Reed valve
• Piston
• Starter
• Oil Service
Chapter 3
Page 8
BRP-Rotax
REPAIR MANUAL
1 Carburetor cover
Nipple screw
3
2 Bowden cable
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0