Installation Of Bearing Sleeve For Sprockets With 11 Teeth Only - Rotax 125 MAX evo Repair Manual

Figure 7.20: Fixation tool
______________________________________________________
INSTALLATION OF BEARING SLEEVE (FOR SPROCKETS WITH 11 TEETH ONLY)
Special tools The following special tools and equipment are required:
Instruction See
1. Put the new bearing sleeve (1) with the beveled edge (2) down onto the clutch drum with
sprocket (11 teeth) and press with installation tool (part no. 676040) until end stop.
Chapter 7
Page 20
BRP-Rotax
REPAIR MANUAL
1 Fixation tool
Needle pin
3
5 Hex. nut.
Part no.
676040
Figure: Installation of bearing sleeve
Sprocket
2
4 Clutch drum
Description
Installation tool
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
Field of application
Sprocket