N N O O T T E E
Push the electric starter (1) into the centering of the housing (3) by rotating it back
and forth until the teeth of the electric starter are meshed with the teeth of the
starter reduction gear assy.
N N O O T T E E
Do not forget to put on the ground cable (6).
3. Tighten Allen screw M6x30 (4) on the opposite side of the electric starter (1). Tightening tor-
que 10 Nm (89 in. lb).
Figure 7.25
______________________________________________________
Chapter 7
Page 24
BRP-Rotax
REPAIR MANUAL
1
Electric starter
Centering of housing
3
5
Allen screw M6x35
Starter support
2
4
Allen screw M6x30
6
Ground cable
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0