Installation Of Clutch And Starter Gear Assy.; Installation Of The Starter Reduction Gear Assy. - Rotax 125 MAX evo Repair Manual

INSTALLATION OF CLUTCH AND STARTER GEAR ASSY.

General Follow the sequence exactly. The starter reduction gear assy. cannot be installed after in-
sertion of the starter gear assy.

INSTALLATION OF THE STARTER REDUCTION GEAR ASSY.

Special tools The following special tools and equipment are required:
Instruction See
1. Lubricate starter reduction gear assy. (1) with lithium-based grease in the area of the two
bearing seats and the two gears.
2. Slide the thrust washer 8.1/150.5 (2) and starter reduction gear assy. (1) into the bearing
seat in the housing together.
Figure 7.17: Starter reduction gear assy.
INSTALLATION OF THE STARTER GEAR ASSY.
Special tools The following special tools and equipment are required:
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
BRP-Rotax
REPAIR MANUAL
Part no.
897330
Figure: Starter reduction gear assy.
Starter reduction gear
1
Part no.
277381
676205
899788
897651
Description
Lithium-based grease
2 Thrust washer
Description
Locking tool (crankshaft)
Fixation tool assy.
LOCTITE 648
LOCTITE 243
Field of application
Starter drive
Field of application
Spark plug thread
Starter gear assy.
Starter gear assy.
Starter drive
Chapter 7
Page 17