Rotax 125 MAX evo Repair Manual page 161

Safety
instructions
Danger of severe burns and scalds! Always allow the engine to cool down to am-
Special tools The following special tools and equipment are required:
Instruction Proceeds follows to dismantle the exhaust system:
1. Disconnect tension springs (3) with spring hooks from the exhaust socket (2).
2. Loosen the nuts M8 with washer on the rubber buffer and remove the exhaust system.
3. Take care about the exhaust gasket between exhaust socket and exhaust, replace if worn
out.
Figure 9.3
______________________________________________________
Chapter 9
Page 4
BRP-Rotax
REPAIR MANUAL
REMOVAL OF THE EXHAUST SYSTEM
bient temperature before starting any work.
Part no.
251680
Exhaust muffler assy.
1
Spring
3
5 Washer 8.4
m WARNING
Description
Spring hook
Exhaust socket assy.
2
4 Rubber buffer 30x30xM8
6 Lock nut M8
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0
Field of application
Tension spring